Tags
No tags to display. Try to select another taxonomy.
-
Short description -
Maxi-Torq™ 1 RPM CCW Rotation Premium Heavy Duty Auger Motor. Fits the stoves listed in the DESCRIPTION. NOTE: Direction of rotation is determined by pointing the output shaft directly at your face. See thumbnail photo example for details. -
Kwik-Fire™ Igniters replacement 310 watt Incology® Premium Igniter.
Fits the stoves listed in the DESCRIPTION.
-
3" Pellet vent brush. Soft Stainless Steel 1/4" - 20 NC threaded end for use with flexible Nylon extension rods (PP5524). -
Convection & Exhaust Blower modular amp style, 2 wire plug in electrical connector 25" long. Fits stoves listed below. -
7 Hole Fire Burn Pot Fits all Traeger Models EXCEPT 070 -
Igniter, "Plug and Play" Compatible with all Traeger Grill models.
-
Adaptor 3" Exhaust Transition Blower Adaptor -
Hi Limit Heat Sensor Open on temp rise @ 325°F Ceramic, 5/8" Surface Mount. -
Lo Limit Heat Sensor Close on temp rise @ 160°F Ceramic, 5/8" Airstream (Hole) Mount. Blower/Fan sensor. -
Lo Limit Heat Sensor Close on temp rise @ 110°F Ceramic, 5/8" Airstream (Hole) Mount. -
Hi Limit Heat Sensor Open on temp rise @ 200°F Ceramic, 5/8" Airstream (Hole) Mount. #2.
-
Hi Limit Heat Sensor Open on temp rise @ 175°F. Ceramic, 5/8" Hole-Airstream mounting, Manual Reset. -
Hi Limit Heat Sensor Open on temp rise @ 170°F.
-
Exhaust Blower Motor Premium Fasco Ball Bearing "Quick Change" Style with 500° Silicone Gasket *Note: Will fit stove models that have the 7" "Quick Change" style hub only -
Exhaust Blower Motor Premium Fasco Ball Bearing "Quick Change" style with 500° Silicone Gasket. *Note: will fit stove models that have the 6 "Quick Change" style hub only. -
Gasket 500° Black Silicone Rubber Convection/Room Air Blower Gasket -
Hi Limit Heat Sensor Open on temp rise @ 200°F. PHENOLIC, Includes spacers for surface or hole-airstream mounting. -
Lo Limit Heat Sensor Close temp rise @ 125°F Ceramic, Straight Terminals, Surface Mount. Blower/fan sensor. -
1 Piece Premium Fire-Tek™ Firebrick. -
500° Silicone Rubber Mounting gasket. Motor Side 5-7/8” ID - 7” OD For use between blower housing and exhaust motor. -
Exhaust Motor Gasket. 500° Silicone Rubber Mounting Gasket. "Quick Change" style hub only. -
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
"Generic" Exhaust - Convection Blower Motor, CW Rotation, Ball Bearings Shaft: 5/16" x 1-1/2" (.312"x1.5") Note: Comes with 3 Female Insulated wire terminals. -
Exhaust Blower Motor, Fasco -1.0 AMP, "Quick Change" style with Hi Temp Fiber Gasket, CW Rotation. **Note: Will fit most pellet stoves models that have the 6 "Quick Change" style hub. -
PREMIUM FASCO BALL BEARING With crimpable wire spade terminals. .90 AMP -
Convection Blower, Fasco 2 Speed, Ball Bearing Motor with 3 wires, mounting grommets 7 crimpable wire spade terminals. 1.05 AMP.Fits Several Wood Stoves including:Regency Wood - Alterra:CS1200, CS2400, CI1250; CI2601, F1100S, F2100M, F2400M, F3100L, F3500B, F5100B, H2000M, H2100M, I1100S, I1200S, I2100M, I2400M, I3100L, R12, S2100M, S3100L, Z2510, Z2500RO.Regency Gas - C33, C33-1, C33-2, C33-3, C34, C34-1, C34-2, C-34-3, C-34-10, GR47, GR48, GR54, GR55, GR57, GR58, GR77, GR78, HZ40E, HZ40E-1, HZ40E-2, HZ40E-10, HZ54E, HZ54E-1, HZ54EPV, P42, P42-1, P42-2, P42-3, P42-4, U23, U24, U41, U41-1, U41-2, U41-3, U41-FS, U41-IN, U42, U43, U44, U-43-1, U43-2, U43-3, U41-DV, U45, U45-1, U45-2, U45-3, U46, U900E, U1500E, Z30DVT.
-
Convection Axial Fan, Sleeve Bearing Motor with wire spade terminals. Nylon Blade. .40 Amp.Fits Several Wood Stoves incuding:Blaze King: KE, PE, PI, RGT, SC20, CK20, SC30, CL30, AF30, and BRII Insert.
-
Convection Blower, Ball Bearing Motor, mounting grommets & crimpable wire spade terminals. .84 AMP. Fits several wood stoves including:* Blaze King: 2203, 7009, 8003, 9703, 9802, PI. (Attn: Confirm fit prior to ordering) Pacific Energy: Alderlea T4 &T4 Classic, Alderlea T5&T5 Classic, Alderlea T6, Vista, Vista Classic, Super 27, Spectrum, Spectrum Classic, Design-D, Neo 1.6, Neostone Series A, Neo 2.5, Neostone Series A, Series C, Neo 1.6, Newcastle Series A, Neo 2.5, Newcastle series A.
-
Convection Blower, Fasco "Plug n Play", 2 speeds, Ball Bearing Motor, mounting grommets & crimpable wire spade terminals, .84 AMP.Fits several wood stoves including:*Blaze King: 2203, 7009, 8003, 9703, 9802, PI. (Attn: Confirm fit prior to ordering)Pacific Energy: Alderlea T4 &T4 Classic, Alderlea T5&T5 Classic, Alderlea T6, Vista, Vista Classic, Super 27, Spectrum, Spectrum Classic, Design-D, Neo 1.6, Neostone Series A, Neo 2.5, Neostone Series A, Series C, Neo 1.6, Newcastle Series A, Neo 2.5, Newcastle series A.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Surface Mount.Fits the Following:Austroflamm Pellet: Integra.
-
Lo Limit Heat Sensor, F-120°F Ceramic, Airstream (Hole) Mount, Blower/Fan sensor.Fits the Following:Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Mini, Omega, P3, P4, Solus, Winsdor.Enviro Gas: 828, Accent 20, Accent 25, Ascot, Bedford, Cara, DV36, DV42, DV50, E20, E30, E33, EG20, EG22, EG25, EG28, EG30, EG33, EG40, EG93, EG95, Focus DX, Haven Q1, Q2, Q3, S30, Sienna, Sonnet, Retreat, Westport.Enviro Wood: 1000, 1200, 1600, 1700, 2100.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
Lo Limit Heat Sensor, F-140/145°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GDI44, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA 1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Lo Limit Heat Sensor, F-110°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor.Fits the Following:Breckwell Pellet: Big E, Classic Cast, P20, P22, P23, P24, P26, P28, P32, P1000, P2000, P2700, P4000, SP6000 =<2013.US Stove Pellet: 5040, Golden Eagle.
-
Lo Limit Heat Sensor, F-120/125°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GD144, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Hi Limit Heat Sensor, L-120°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Quadrafire Pellet: 800, 1000, 1100i Insert.Quadrafire Gas: GB40 FS, GB40i Insert.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Enviro Pellet: EF2, EF3, EF4, EF5 Evolution, Solus.Vista Flame Pellet: VF100.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Heatilator Eco-Choice pellet: CAB50, PS35, PS50.Quadrifire Pellet: Castile, Castile Insert (#2), Classic Bay 1200 &1200i insert, Contour, Edge 60 ZC Fireplace, Mt Vernon, Mt Vernon AE &AE insert, Santa Fe & Santa Fe insert.SBI Stoves:Drolet Pellet: Eco-35, Eco-45.Enerzone Pellet: Bio-35 (#=100-324), Bio-35 insert (#=100-324), Bio-45MF, Eurozone.Flame Pellet: FP-35 (#=100-440), FP-35 Insert (#=>100), FP-45 (#=100-1354)Osburn Pellet: Hybrid 35 Insert (#=100-499), Hybrid 45.PSG Pellet: Cobra/Legend.PSG Wood: Mini-Caddy Furnace - Wood or Combination (#=14464-15413).
-
Hi Limit Heat Sensor, L-200°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Quadrafire Pellet: 800 (#3), 1000 (#3), 1100i (#3), MT Vernon (#2).Pel Pro Pellet: PPC90, TSC90.
-
Hi Limit Heat Sensor, L-200°F Ceramic, Large Surface Mount, Manual Reset.Fits the Following: Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Omega, P3, P4, Solus, Windsor.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
KB Electronics 2.5 Amps -Heavier duty than most Control Knob & mounting nut On-Off - Hi to Lo operation Built in RFI filter Adjustable potentiometer trim pot
-
140°F, Ceramic, Surface or Airstream (Hole) Mount -
Induction Fan, "Plug & Play", Compatible with all Traeger grill models.
-
Auger Drive Motor, 2 RPM CW, "Plug & Play", Compatible with All Traeger grill models.
-
Exhaust Heat Sensor, Low Limit 120°F, Ceramic. Fits the following: Avalon - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Avalon AGP, Newport Bay PI, Newport PS. Lopi - Heritage Bay PI, Heritage Bay PS, Leyden PS, Lopi AGP, Pioneer Bay PI, Pioneer PS, Yankee Bay PI, Yankee PS.
-
Igniter, Kwik-Fire Premium Igniter replacement - 400 watts. Fits the following: Enviro - EF5 - Evolution Ser. # =>10221, Empress FS & FPI, Milan, Mini, Windsor. VistaFlame: - Windsor
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, 15 fins, 310 Watts. Fits the following: Harman - P-38 , P-43, P-61, P-61A, P-68, PF-100, PB-105, HF-60, Advance, Accentra FS & Insert, Invincible RS.
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, without fuse & Anti-Seize. Fits the Following: Whitfield - Profile 20&30; Advantage. -
Auger Motor, 4 RPM CW, Standard Auger Motor.
-
Auger Motor, 2 RPM CW, Standard Auger motor.
-
Auger Motor, 1RPM CCW (1.45NL), Standard Auger Motor.
-
Auger Motor, 1 RPM CW (1.1 NL), Standard Auger Motor. -
Maxi-Torq™ 4 RPM CW Premium Heavy Duty Auger Motor. Fits the following stoves that use a direct drive motor (no chain) => late 2009: Harman®: Absolute 43, Accentra FS, Advance FS, XXV FS Models after late 2009. Replaces Harman® part # 3-20-00677 -
"Quick Change" Style with gasket (PP5200) included. *Note: Will fit stove models that have the 6" "Quick Change" style hub only.
Fits the following:*Avalon® - 900 PI & PS, Newport PS, Newport Bay PILopi® - Fox Fire 400 PS & PI, fox Fire PS, Elan, Heritage Bay PS & PI, Pioneer Bay PS & PI. -
CONVECTION - BLOWER“Plug & Play” Fits several pellet stoves including:*ST Croix® Models - Afton Bay, Auburn, Element P, Greenfield, Hastings, Prescott EXP, Prescot EXL, Lancaster, Pepin.
-
CONVECTION - BLOWER“Plug & Play” Includes Mounting gasket. Fits several pellet stoves including:*Avalon® - 900 PI & PS, AGP, Arbor, Astoria Bay PI,Lopi® - AGP, Fox Fire 400 PS & PI, Fox Fire PS, Leyden PS, Yankee PS & PI.Replaces: Avalon® & Lopi 250-00588, 90-0491, 98900755, 98900755a
-
CONVECTION - BLOWER“Plug & Play” 1.3 AMP, 2400 Full Load RPM, Fits several gas, pellet & wood stoves, including:*Heat & Glo® Wood - Northstar SER. #=<0091535936Heatilator® Wood - Constitution SER. #=<0091535936, WS18, WS22.Heatilator® Pellet - Eco Choice PS35.Quadra-fire® Gas - Castile, Columbia Bay FS & Ins., DV400S, DV400SL, DV40 Step Top, DV125, DV130, DV132, Garnet MBK, Garnet T, GND Bay, GB40 FS, GND Bay Ins., GB40-I SER. #=< 253376, Hudson Bay FS & Insert, Remington QFP30, Remington QFP40, Sapphire, Topaz.Quadra-Fire® Pellet - Classic Bay Ins. 1200I, Castile FS & Ins., Contour, Santa Fe FS & Ins.Quadra-Fire® Wood - 1900 FS, 2100 FS < YR. 1995, 2100 Millennium ACT, 12100 Millennium ACC, 21M-ACC, 2700-I=< Nov. 2009, 3100 Millennium ACC, 3100 ACC, 3100 FS (PRE-ACT), 3100 FS ACT, 4100 FS, 4300 FS (PRE-ACT), 4300 Millennium ACC, 4300 Millennium ACT, 4300 ACT, 43ST - ACC, 5700 ACT, 57ST-ACC, 7100 Fireplace SER.#=> 0091588198, Cape Cod, Cumberland Gap, Isle Royale, Yosemite.Replaces: HHT®, Quadra-Fire, Heat & Glo, Heatilator : 812-4900, 812-4540
-
IGNITERDealer Bulk Pack of 10 Kwik-Fire™ Premium Igniter replacement - 200 watts Incoloy®Fits the following:Avalon® - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Newport Bay PI, Newport PS.Lopi® - Heritage Bay PI, Leyden PS, Pioneer Bay PI, Pioneer PS, Yankee Bay.Replaces Travis® 99300148, 99300149
-
Kwik-Fire™ 200 watt premium Incoloy® Igniter replacement. Fits Avalon® - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Newport Bay PI, Newport PS. Lopi® - Heritage Bay PI, Leyden PS, Pioneer PS, Yankee Bay.
Replaces: Travis® 99300148, 99300149
-
IGNITER Dealer Bulk Pack of 10 Kwik-Fire™ Premium Igniter replacement - 400 watts Incoloy® Fits the following: Enviro® - EF5 - Evolution Ser. #=> 10221, Empress FS & FPI, Milan, Mini< Windsor VistaFlame® - Windsor
-
Kwik-Fire™ 400 watt premium Incoloy® Igniter replacement. Fits Enviro® EF5 - Evolution Ser. # = > 10221, Empress FS & FPI, Milan, Mini, Windsor, VistaFlame® - Windsor
Replaces Enviro® OEM Part # 50-619, 20-022
VistaFlame® OEM Part # 50-619, 20-022
-
Harman Igniter Holder-Cradle
-
GASKET Hi Temp Convection/Room Air Blower Gasket Fits the following Pellet Stoves: US Stove® - 6035, 5500XLT, 5500M, 5510, 5700, 6037, 6039, 6039HF, 6039I, 6041, 6041HF, and 6041I -
Baffle Board & Ceramic Blanket Kit 2 Piece. Includes precut blanket Fits the following: Quadrafire® - 57ST-ACC (5700) -
Baffle Board & Ceramic Blanket Kit 2 Piece. Includes precut blanket Fits the following: Quadrafire® - 5700-ACT (820-0721) -
Baffle Board & Ceramic Blanket Kit 2 Piece. Includes precut blanket Fits the following: Heatilator® - WS22 Eco Choice -
Baffle Board & Ceramic Blanket Kit 2 Piece. Includes precut blanket Fits the following: Quadrafire® - 51I-ACC -
Baffle Board & Ceramic Blanket Kit 1 Piece. Includes precut blanket Fits the following: Quadrafire® - 5100I-ACT -
Baffle Board & Ceramic Blanket Kit 2 Piece. Includes precut blanket Fits the following: Quadrafire® - 41-I-ACC, 41-I-ACC-BK -
Baffle Board Kit 2 Piece. Includes precut blanket Fits the following: Quadrafire® - 2100 Millenium ACC (21M-ACC)
-
Baffle Board & Ceramic Blanket Kit 1 Piece. Includes precut blanket Fits the following: Quadrafire® - Yosemite -
IMPELLER, EXHAUST BLOWER 5” - 12 Petal Fits the following pellet stoves: Harman® - Accentra FS, Invincible T, Pellet Pro II, PC-45 & PF100 -
EXHAUST BLOWER MOTOR “QUICK CHANGE” Style with Gasket *NOTE: Will fit stoves models that have the 7 “ Large Plate Quick Change” style hub only with 5.6” impeller. Fits the following:* Enviro® - Maxx, Maxx-A, Maxx-B, Maxx-1, Omega, Omega-A Vista Flame®- VF-170, VF-170-B Replaces Enviro® 50-1901 -
CONVECTION - DISTRIBUTION BLOWER “Plug & Play” Includes Hi-Temp Mounting gasket Fits the following: US Stove® - 6035, 5500XLT, 5500M, 5510, 5700, 6037, 6039, 6039HF, 6039I, 6041, 6041HF, and 6041I -
CONVECTION - DISTRIBUTION BLOWER “Plug & Play” Fits the following: Harman® - 44 MAG, ACC52i, Advance, Clarity 929DV & 929BV, DVC 500, Invincible RS & T, P-38, P-43, P-61, P-61A, P-68, PC-45, Pellet Pro II -
IGNITER Dealer Bulk Pack of 10 Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.75” “Long” Fits the following: ST Croix® - Afton Bay, Ashby P, Ashby MF, Prescott EXL, Prescott ESP. Models made 2004 & after . -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.75” “Long” Fits the following: ST Croix® - Afton Bay, Ashby P, Ashby MF, Prescott EXL, Prescott ESP . Models made 2004 & after . -
IGNITER Dealer Bulk Pack of 10 Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.25” “Short” Fits the following: ST Croix® - Element P, Hastings, York Insert & All units made 2003 & earlier -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.25” “Short” Fits the following: ST Croix® - Element P, Hastings, York Insert & All units made 2003 & earlier -
IGNITER Dealer Bulk Pack of 10 Kwik-Fire™ Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® Fits the following: US Stove®- King/Ashley 5500, 5500XL, 5500M, 5510, 5700, -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® Fits the following: US Stove®- King/Ashley 5500, 5500XL, 5500M, 5510, 5700, -
Burn Grate 3-5/8” wide, Stainless Steel, identical to OEM part. Fits : US Stove® King - Ashley 5510, 5500M, 5500XL, 5500XLT. -
1 piece Premium FIRE-TEK™ Firebrick. Fits the following: Pel Pro™ - FPP2BD, FPPST4BD, FPPBW2GD, IPPBW2GD, HHPP2BD, HHPP32BD, HHPP2BD, HHPP32BD Glow Boy™ - CCGB1, CCGB2, HGBH1 Home Heater, HGBH3 Home Heater 300, HGB1 Shop Heater, HGB3 Shop Heater 300, FBG Step Top, FGB Bay View, IGB Bay View, Classic Insert -
Blower 5" - 12 Petal x 2 (24). Fits Harman®ACC521 Insert, Advance, HF60, Invincible Insert, Invincible RS, P38, P43, P61, P61A, P68, XXV, PB105, PF100, DVC500, 44 MAG. -
IMPELLER, EXHAUST BLOWER 5.6” - 12 Petal Fits the following pellet stoves: Enviro® - Maxx, Maxx-A, Maxx-B, Maxx-1, Omega, Omega-A Vista Flame®- VF-170, VF-170-B. -
3 piece Premium Fire-Tek™ Firebrick set. Replaces St Croix® part # 80P53983 -
3 piece Premium Fire-Tek™ Firebrick set. Fits: Fits St Croix® - Auburn FS Replaces St Croix® part # 80P53982
-
Impeller 4.5" - 11 Petal. Fits Kozi® - KSH120, KSH120DX, 100 FS & Insert, BayWin FS & Insert, Previa.
-
"Quick Change" Style with gasket. *Note: Typically does not require removal of exhaust blower housing.
Fits the stoves listed in the DESCRIPTION.
-
"Quick Change" Style with gasket 3000 RPM.
*Note: Typically does not require removal of exhaust blower housing.
Fits the stoves listed in the DESCRIPTION.
-
*Note Will fit older 3 wire models as well as newer 2 wire models with digital controls. Newer 2 wire models would be connected by not utilizing the 3rd wire (brown) and leaving it unconnected.
Fits several pellet stoves listed below: -
Includes Neoprene Mounting gasket. Fits several pellet stoves including: Whitfield® - Quest FS & Quest INS Replaces Lennox® part # 13646109 Steel blower wheel - not plastic. -
Fits all Whitfield® & Enviro®.
Replaces Lennox® part: 61050003 -
Replaces upper bearing. Fits the following stoves: Whitfield® & Traditions® - T-300P. -
Kwik-Fire™ 300 watt premium Incoloy® Igniters replacement. Fists the stoves listed below. -
Kwik-Fire™ Premium Igniters replacement 300 watt Incoloy® Igniters.
Fits the stoves listed below
-
Replacement Includes Mounting Bracket. -
Firebrick 1-1/4" Thick 4-1/2" x 7-1/2".
Fits: Quadrafire® - Yosemite
Replaces Quadrafire® Stove: BRICK-7004 19.4
-
Firebrick -1-1/4" Thick W/Hole -4-1/2" x 9".
Fits: Quadrafire®.
Models: 41-I & Bodega Bay.
Replaces Quadrafire® brick: SRV-7004-199.
