Tags
No tags to display. Try to select another taxonomy.
-
Short description -
Maxi-Torq™ 1 RPM CCW Rotation Premium Heavy Duty Auger Motor. Fits the stoves listed in the DESCRIPTION. NOTE: Direction of rotation is determined by pointing the output shaft directly at your face. See thumbnail photo example for details. -
Kwik-Fire™ Igniters replacement 310 watt Incology® Premium Igniter.
Fits the stoves listed in the DESCRIPTION.
-
3" Pellet vent brush. Soft Stainless Steel 1/4" - 20 NC threaded end for use with flexible Nylon extension rods (PP5524). -
Convection & Exhaust Blower modular amp style, 2 wire plug in electrical connector 25" long. Fits stoves listed below. -
7 Hole Fire Burn Pot Fits all Traeger Models EXCEPT 070 -
Igniter, "Plug and Play" Compatible with all Traeger Grill models.
-
Adaptor 3" Exhaust Transition Blower Adaptor -
Hi Limit Heat Sensor Open on temp rise @ 325°F Ceramic, 5/8" Surface Mount. -
Lo Limit Heat Sensor Close on temp rise @ 160°F Ceramic, 5/8" Airstream (Hole) Mount. Blower/Fan sensor. -
Lo Limit Heat Sensor Close on temp rise @ 110°F Ceramic, 5/8" Airstream (Hole) Mount. -
Hi Limit Heat Sensor Open on temp rise @ 200°F Ceramic, 5/8" Airstream (Hole) Mount. #2.
-
Hi Limit Heat Sensor Open on temp rise @ 175°F. Ceramic, 5/8" Hole-Airstream mounting, Manual Reset. -
Hi Limit Heat Sensor Open on temp rise @ 170°F.
-
Exhaust Blower Motor Premium Fasco Ball Bearing "Quick Change" Style with 500° Silicone Gasket *Note: Will fit stove models that have the 7" "Quick Change" style hub only -
Exhaust Blower Motor Premium Fasco Ball Bearing "Quick Change" style with 500° Silicone Gasket. *Note: will fit stove models that have the 6 "Quick Change" style hub only. -
Gasket 500° Black Silicone Rubber Convection/Room Air Blower Gasket -
Hi Limit Heat Sensor Open on temp rise @ 200°F. PHENOLIC, Includes spacers for surface or hole-airstream mounting. -
Lo Limit Heat Sensor Close temp rise @ 125°F Ceramic, Straight Terminals, Surface Mount. Blower/fan sensor. -
1 Piece Premium Fire-Tek™ Firebrick. -
500° Silicone Rubber Mounting gasket. Motor Side 5-7/8” ID - 7” OD For use between blower housing and exhaust motor. -
Exhaust Motor Gasket. 500° Silicone Rubber Mounting Gasket. "Quick Change" style hub only. -
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
"Generic" Exhaust - Convection Blower Motor, CW Rotation, Ball Bearings Shaft: 5/16" x 1-1/2" (.312"x1.5") Note: Comes with 3 Female Insulated wire terminals. -
Exhaust Blower Motor, Fasco -1.0 AMP, "Quick Change" style with Hi Temp Fiber Gasket, CW Rotation. **Note: Will fit most pellet stoves models that have the 6 "Quick Change" style hub. -
PREMIUM FASCO BALL BEARING With crimpable wire spade terminals. .90 AMP -
Convection Blower, Fasco 2 Speed, Ball Bearing Motor with 3 wires, mounting grommets 7 crimpable wire spade terminals. 1.05 AMP.Fits Several Wood Stoves including:Regency Wood - Alterra:CS1200, CS2400, CI1250; CI2601, F1100S, F2100M, F2400M, F3100L, F3500B, F5100B, H2000M, H2100M, I1100S, I1200S, I2100M, I2400M, I3100L, R12, S2100M, S3100L, Z2510, Z2500RO.Regency Gas - C33, C33-1, C33-2, C33-3, C34, C34-1, C34-2, C-34-3, C-34-10, GR47, GR48, GR54, GR55, GR57, GR58, GR77, GR78, HZ40E, HZ40E-1, HZ40E-2, HZ40E-10, HZ54E, HZ54E-1, HZ54EPV, P42, P42-1, P42-2, P42-3, P42-4, U23, U24, U41, U41-1, U41-2, U41-3, U41-FS, U41-IN, U42, U43, U44, U-43-1, U43-2, U43-3, U41-DV, U45, U45-1, U45-2, U45-3, U46, U900E, U1500E, Z30DVT.
-
Convection Axial Fan, Sleeve Bearing Motor with wire spade terminals. Nylon Blade. .40 Amp.Fits Several Wood Stoves incuding:Blaze King: KE, PE, PI, RGT, SC20, CK20, SC30, CL30, AF30, and BRII Insert.
-
Convection Blower, Ball Bearing Motor, mounting grommets & crimpable wire spade terminals. .84 AMP. Fits several wood stoves including:* Blaze King: 2203, 7009, 8003, 9703, 9802, PI. (Attn: Confirm fit prior to ordering) Pacific Energy: Alderlea T4 &T4 Classic, Alderlea T5&T5 Classic, Alderlea T6, Vista, Vista Classic, Super 27, Spectrum, Spectrum Classic, Design-D, Neo 1.6, Neostone Series A, Neo 2.5, Neostone Series A, Series C, Neo 1.6, Newcastle Series A, Neo 2.5, Newcastle series A.
-
Convection Blower, Fasco "Plug n Play", 2 speeds, Ball Bearing Motor, mounting grommets & crimpable wire spade terminals, .84 AMP.Fits several wood stoves including:*Blaze King: 2203, 7009, 8003, 9703, 9802, PI. (Attn: Confirm fit prior to ordering)Pacific Energy: Alderlea T4 &T4 Classic, Alderlea T5&T5 Classic, Alderlea T6, Vista, Vista Classic, Super 27, Spectrum, Spectrum Classic, Design-D, Neo 1.6, Neostone Series A, Neo 2.5, Neostone Series A, Series C, Neo 1.6, Newcastle Series A, Neo 2.5, Newcastle series A.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Surface Mount.Fits the Following:Austroflamm Pellet: Integra.
-
Lo Limit Heat Sensor, F-120°F Ceramic, Airstream (Hole) Mount, Blower/Fan sensor.Fits the Following:Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Mini, Omega, P3, P4, Solus, Winsdor.Enviro Gas: 828, Accent 20, Accent 25, Ascot, Bedford, Cara, DV36, DV42, DV50, E20, E30, E33, EG20, EG22, EG25, EG28, EG30, EG33, EG40, EG93, EG95, Focus DX, Haven Q1, Q2, Q3, S30, Sienna, Sonnet, Retreat, Westport.Enviro Wood: 1000, 1200, 1600, 1700, 2100.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
Lo Limit Heat Sensor, F-140/145°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GDI44, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA 1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Lo Limit Heat Sensor, F-110°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor.Fits the Following:Breckwell Pellet: Big E, Classic Cast, P20, P22, P23, P24, P26, P28, P32, P1000, P2000, P2700, P4000, SP6000 =<2013.US Stove Pellet: 5040, Golden Eagle.
-
Lo Limit Heat Sensor, F-120/125°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GD144, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Hi Limit Heat Sensor, L-120°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Quadrafire Pellet: 800, 1000, 1100i Insert.Quadrafire Gas: GB40 FS, GB40i Insert.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Enviro Pellet: EF2, EF3, EF4, EF5 Evolution, Solus.Vista Flame Pellet: VF100.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Heatilator Eco-Choice pellet: CAB50, PS35, PS50.Quadrifire Pellet: Castile, Castile Insert (#2), Classic Bay 1200 &1200i insert, Contour, Edge 60 ZC Fireplace, Mt Vernon, Mt Vernon AE &AE insert, Santa Fe & Santa Fe insert.SBI Stoves:Drolet Pellet: Eco-35, Eco-45.Enerzone Pellet: Bio-35 (#=100-324), Bio-35 insert (#=100-324), Bio-45MF, Eurozone.Flame Pellet: FP-35 (#=100-440), FP-35 Insert (#=>100), FP-45 (#=100-1354)Osburn Pellet: Hybrid 35 Insert (#=100-499), Hybrid 45.PSG Pellet: Cobra/Legend.PSG Wood: Mini-Caddy Furnace - Wood or Combination (#=14464-15413).
-
Hi Limit Heat Sensor, L-200°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Quadrafire Pellet: 800 (#3), 1000 (#3), 1100i (#3), MT Vernon (#2).Pel Pro Pellet: PPC90, TSC90.
-
Hi Limit Heat Sensor, L-200°F Ceramic, Large Surface Mount, Manual Reset.Fits the Following: Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Omega, P3, P4, Solus, Windsor.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
KB Electronics 2.5 Amps -Heavier duty than most Control Knob & mounting nut On-Off - Hi to Lo operation Built in RFI filter Adjustable potentiometer trim pot
-
140°F, Ceramic, Surface or Airstream (Hole) Mount -
Induction Fan, "Plug & Play", Compatible with all Traeger grill models.
-
Auger Drive Motor, 2 RPM CW, "Plug & Play", Compatible with All Traeger grill models.
-
Exhaust Heat Sensor, Low Limit 120°F, Ceramic. Fits the following: Avalon - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Avalon AGP, Newport Bay PI, Newport PS. Lopi - Heritage Bay PI, Heritage Bay PS, Leyden PS, Lopi AGP, Pioneer Bay PI, Pioneer PS, Yankee Bay PI, Yankee PS.
-
Igniter, Kwik-Fire Premium Igniter replacement - 400 watts. Fits the following: Enviro - EF5 - Evolution Ser. # =>10221, Empress FS & FPI, Milan, Mini, Windsor. VistaFlame: - Windsor
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, 15 fins, 310 Watts. Fits the following: Harman - P-38 , P-43, P-61, P-61A, P-68, PF-100, PB-105, HF-60, Advance, Accentra FS & Insert, Invincible RS.
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, without fuse & Anti-Seize. Fits the Following: Whitfield - Profile 20&30; Advantage. -
Auger Motor, 4 RPM CW, Standard Auger Motor.
