Tags
-
Induction Fan, "Plug & Play", Compatible with all Traeger grill models. -
"Generic" Exhaust - Convection Blower Motor, CW Rotation, Ball Bearings Shaft: 5/16" x 1-1/2" (.312"x1.5") Note: Comes with 3 Female Insulated wire terminals. -
Exhaust Blower Motor, Fasco -1.0 AMP, "Quick Change" style with Hi Temp Fiber Gasket, CW Rotation. **Note: Will fit most pellet stoves models that have the 6 "Quick Change" style hub. -
Auger Drive Motor, 2 RPM CW, "Plug & Play", Compatible with All Traeger grill models.
-
Auger Motor, 1RPM CCW (1.45NL), Standard Auger Motor.
-
Auger Motor, 4 RPM CW, Standard Auger Motor.
-
Auger Motor, 2 RPM CW, Standard Auger motor.
-
Auger Motor, 1 RPM CW (1.1 NL), Standard Auger Motor. -
Igniter, "Plug and Play" Compatible with all Traeger Grill models.
-
Igniter, Kwik-Fire Premium Igniter replacement - 400 watts. Fits the following: Enviro - EF5 - Evolution Ser. # =>10221, Empress FS & FPI, Milan, Mini, Windsor. VistaFlame: - Windsor
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, 15 fins, 310 Watts. Fits the following: Harman - P-38 , P-43, P-61, P-61A, P-68, PF-100, PB-105, HF-60, Advance, Accentra FS & Insert, Invincible RS.
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, without fuse & Anti-Seize. Fits the Following: Whitfield - Profile 20&30; Advantage. -
KB Electronics 2.5 Amps -Heavier duty than most Control Knob & mounting nut On-Off - Hi to Lo operation Built in RFI filter Adjustable potentiometer trim pot
-
140°F, Ceramic, Surface or Airstream (Hole) Mount -
Exhaust Heat Sensor, Low Limit 120°F, Ceramic. Fits the following: Avalon - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Avalon AGP, Newport Bay PI, Newport PS. Lopi - Heritage Bay PI, Heritage Bay PS, Leyden PS, Lopi AGP, Pioneer Bay PI, Pioneer PS, Yankee Bay PI, Yankee PS.
-
7 Hole Fire Burn Pot Fits all Traeger Models EXCEPT 070 -
Convection & Exhaust Blower modular amp style, 2 wire plug in electrical connector 25" long. Fits stoves listed below. -
6-7/8" wide. Stainless Steel, Replacement for 13 Bar Ultragrate. -
Stainless steel replacement for 10 bar Ultragrate®. The body of this grate is one piece. The bottom has welded round rods. May require part PP2199 UniGrate Adaptor Plate for fitting. ****NOTE**** Measure your burn grate before ordering. -
UNIGRATE™ Adaptor plate use this adaptor plate to convert the 14 bar, 6-7/8” wide UltraGrate™, to the 5-1/4” wide UniGrate™.
Fits the stoves listed in the DESCRIPTION. For use with PP2007 Uni-Grate
-
longdesc -
Synthetic Bearing Oil "Anderol 465" 2 oz.
-
500°F clear, 10.3 FL OZ tube.
Ideal for sealing pellet stove exhaust.
OEM part # 601C
Cases of 12 available.
-
Silicone 500°F black. 10.3 FL OZ tube.
Ideal for sealing pellet stove exhaust.
OEM part # 601B
Cases of 12 available.
-
1050°F, black, 10.3 FL OZ tube.
Flexible sealant (similar to Mil-Pac™).
For sealing vent pipe joints.
OEM part # 615
Cases of 12 available.
-
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.75” “Long” Fits the following: ST Croix® - Afton Bay, Ashby P, Ashby MF, Prescott EXL, Prescott ESP . Models made 2004 & after . -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.25” “Short” Fits the following: ST Croix® - Element P, Hastings, York Insert & All units made 2003 & earlier -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® Fits the following: US Stove®- King/Ashley 5500, 5500XL, 5500M, 5510, 5700, -
Kwik-Fire™ Premium Igniter replacement kit with 400 watt standard Incoloy® Igniter. Includes fuse & anti-seize compound. -
PREMIUM FASCO BALL BEARING With crimpable wire spade terminals. .90 AMP -
Convection Blower, Fasco 2 Speed, Ball Bearing Motor with 3 wires, mounting grommets 7 crimpable wire spade terminals. 1.05 AMP.Fits Several Wood Stoves including:Regency Wood - Alterra:CS1200, CS2400, CI1250; CI2601, F1100S, F2100M, F2400M, F3100L, F3500B, F5100B, H2000M, H2100M, I1100S, I1200S, I2100M, I2400M, I3100L, R12, S2100M, S3100L, Z2510, Z2500RO.Regency Gas - C33, C33-1, C33-2, C33-3, C34, C34-1, C34-2, C-34-3, C-34-10, GR47, GR48, GR54, GR55, GR57, GR58, GR77, GR78, HZ40E, HZ40E-1, HZ40E-2, HZ40E-10, HZ54E, HZ54E-1, HZ54EPV, P42, P42-1, P42-2, P42-3, P42-4, U23, U24, U41, U41-1, U41-2, U41-3, U41-FS, U41-IN, U42, U43, U44, U-43-1, U43-2, U43-3, U41-DV, U45, U45-1, U45-2, U45-3, U46, U900E, U1500E, Z30DVT.
-
Convection Axial Fan, Sleeve Bearing Motor with wire spade terminals. Nylon Blade. .40 Amp.Fits Several Wood Stoves incuding:Blaze King: KE, PE, PI, RGT, SC20, CK20, SC30, CL30, AF30, and BRII Insert.
-
Convection Blower, Ball Bearing Motor, mounting grommets & crimpable wire spade terminals. .84 AMP. Fits several wood stoves including:* Blaze King: 2203, 7009, 8003, 9703, 9802, PI. (Attn: Confirm fit prior to ordering) Pacific Energy: Alderlea T4 &T4 Classic, Alderlea T5&T5 Classic, Alderlea T6, Vista, Vista Classic, Super 27, Spectrum, Spectrum Classic, Design-D, Neo 1.6, Neostone Series A, Neo 2.5, Neostone Series A, Series C, Neo 1.6, Newcastle Series A, Neo 2.5, Newcastle series A.
-
Convection Blower, Fasco "Plug n Play", 2 speeds, Ball Bearing Motor, mounting grommets & crimpable wire spade terminals, .84 AMP.Fits several wood stoves including:*Blaze King: 2203, 7009, 8003, 9703, 9802, PI. (Attn: Confirm fit prior to ordering)Pacific Energy: Alderlea T4 &T4 Classic, Alderlea T5&T5 Classic, Alderlea T6, Vista, Vista Classic, Super 27, Spectrum, Spectrum Classic, Design-D, Neo 1.6, Neostone Series A, Neo 2.5, Neostone Series A, Series C, Neo 1.6, Newcastle Series A, Neo 2.5, Newcastle series A.
-
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
500° Silicone Rubber Mounting gasket. Motor Side 5-7/8” ID - 7” OD For use between blower housing and exhaust motor. -
Exhaust Motor Gasket. 500° Silicone Rubber Mounting Gasket. "Quick Change" style hub only. -
Hi Limit Heat Sensor, L-250°F Ceramic, Surface Mount.Fits the Following:Austroflamm Pellet: Integra.
-
Lo Limit Heat Sensor, F-120°F Ceramic, Airstream (Hole) Mount, Blower/Fan sensor.Fits the Following:Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Mini, Omega, P3, P4, Solus, Winsdor.Enviro Gas: 828, Accent 20, Accent 25, Ascot, Bedford, Cara, DV36, DV42, DV50, E20, E30, E33, EG20, EG22, EG25, EG28, EG30, EG33, EG40, EG93, EG95, Focus DX, Haven Q1, Q2, Q3, S30, Sienna, Sonnet, Retreat, Westport.Enviro Wood: 1000, 1200, 1600, 1700, 2100.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
Lo Limit Heat Sensor, F-110°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor.Fits the Following:Breckwell Pellet: Big E, Classic Cast, P20, P22, P23, P24, P26, P28, P32, P1000, P2000, P2700, P4000, SP6000 =<2013.US Stove Pellet: 5040, Golden Eagle.
-
Lo Limit Heat Sensor, F-140/145°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GDI44, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA 1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Lo Limit Heat Sensor, F-120/125°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GD144, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Hi Limit Heat Sensor, L-120°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Quadrafire Pellet: 800, 1000, 1100i Insert.Quadrafire Gas: GB40 FS, GB40i Insert.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Enviro Pellet: EF2, EF3, EF4, EF5 Evolution, Solus.Vista Flame Pellet: VF100.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Heatilator Eco-Choice pellet: CAB50, PS35, PS50.Quadrifire Pellet: Castile, Castile Insert (#2), Classic Bay 1200 &1200i insert, Contour, Edge 60 ZC Fireplace, Mt Vernon, Mt Vernon AE &AE insert, Santa Fe & Santa Fe insert.SBI Stoves:Drolet Pellet: Eco-35, Eco-45.Enerzone Pellet: Bio-35 (#=100-324), Bio-35 insert (#=100-324), Bio-45MF, Eurozone.Flame Pellet: FP-35 (#=100-440), FP-35 Insert (#=>100), FP-45 (#=100-1354)Osburn Pellet: Hybrid 35 Insert (#=100-499), Hybrid 45.PSG Pellet: Cobra/Legend.PSG Wood: Mini-Caddy Furnace - Wood or Combination (#=14464-15413).
-
Hi Limit Heat Sensor, L-200°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Quadrafire Pellet: 800 (#3), 1000 (#3), 1100i (#3), MT Vernon (#2).Pel Pro Pellet: PPC90, TSC90.
-
Hi Limit Heat Sensor, L-200°F Ceramic, Large Surface Mount, Manual Reset.Fits the Following: Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Omega, P3, P4, Solus, Windsor.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
Replacement Includes Mounting Bracket. -
1/4" - 20 NC to 5/16" - 18 NC Adaptor for adapting to or from Worcester/Rutland pellet brushes and rods. -
160°F Phenolic Heat Sensor. Includes spacers for surface or hole mounting.
Replaces Enviro® part # EF-013
Also fits hundreds of different models of wood & pellet stoves & gas fireplaces.
-
Low limit 140°F Phenolic heat sensor Includes spacers for surface or hole mounting. -
Low Limit 130°F Phenolic Heat Sensor. -
Low Limit 120°F Phenolic Heat Sensor. Fits hundreds of different models of wood & pellet stoves & gas fireplaces. -
Fits hundreds of different models of wood, pellet stoves & gas fireplaces. -
Lo Limit Heat Sensor Close temp rise @ 125°F Ceramic, Straight Terminals, Surface Mount. Blower/fan sensor. -
Lo Limit Heat Sensor
-
Lo Limit Heat Sensor Close on temp rise @ 160°F Ceramic, 5/8" Airstream (Hole) Mount. Blower/Fan sensor. -
Lo Limit Heat Sensor Close on temp rise @ 110°F Ceramic, 5/8" Airstream (Hole) Mount. -
IMPELLER, EXHAUST BLOWER 5.6” - 12 Petal Fits the following pellet stoves: Enviro® - Maxx, Maxx-A, Maxx-B, Maxx-1, Omega, Omega-A Vista Flame®- VF-170, VF-170-B. -
Blower 5" - 12 Petal x 2 (24). Fits Harman®ACC521 Insert, Advance, HF60, Invincible Insert, Invincible RS, P38, P43, P61, P61A, P68, XXV, PB105, PF100, DVC500, 44 MAG. -
IMPELLER, EXHAUST BLOWER 5” - 12 Petal Fits the following pellet stoves: Harman® - Accentra FS, Invincible T, Pellet Pro II, PC-45 & PF100 -
Impeller 4.5" - 11 Petal. Fits Kozi® - KSH120, KSH120DX, 100 FS & Insert, BayWin FS & Insert, Previa.
-
For exhaust blower 4.5" - 11 Petal.
Fits the stoves listed in the DESCRIPTION.
-
Blower 4.44" - 9 Petal.
Fits the stoves listed in the DESCRIPTION.
-
Blower impeller 5.35" 12 petal.
Fits the stoves listed in the DESCRIPTION.
-
Blower 4.75" - 12 Petal
Fits the stoves listed in the DESCRIPTION.
-
Steel blower wheel - Not plastic
Centrifugal, 3.75" convection replacement for plastic models.
Fits convection blowers listed below.
-
Harman Igniter Holder-Cradle
-
Kwik-Fire™ Igniter replacement 310 watt Incology® Premium Igniter.
Fits the stoves listed in the DESCRIPTION.
-
Kwik-Fire™ Dealer Bulk Pack of 10 Igniters replacement 300 watt Premium Igniters. Fits Glow Boy® - & Pel Pro®. Replaces Glow Boy® - & Pel Pro® part # KS-5030-1061 ACIGNAS -
Kwik-Fire™ Igniter replacement 300 watt Premium Igniter. Fits Glow Boy® - & Pel Pro® Replaces Glow Boy® - & Pel Pro® part # KS-5030-1061 ACIGNAS -
Kwik-Fire™ 400 watt premium Incoloy® Igniter replacement. Fits Enviro® EF5 - Evolution Ser. # = > 10221, Empress FS & FPI, Milan, Mini, Windsor, VistaFlame® - Windsor
Replaces Enviro® OEM Part # 50-619, 20-022
VistaFlame® OEM Part # 50-619, 20-022
-
Kwik-Fire™ 300 watt premium Incoloy® Igniter replacement.
Fists the stoves listed below.
-
Kwik-Fire™ Premium Igniter replacement for 300 watt standard Incoloy® Igniter.
Fits the stoves listed in the DESCRIPTION.
-
Kwik-Fire™ 200 watt premium Incoloy® Igniter replacement. Fits Avalon® - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Newport Bay PI, Newport PS. Lopi® - Heritage Bay PI, Leyden PS, Pioneer PS, Yankee Bay.
Replaces: Travis® 99300148, 99300149
-
IGNITERDealer Bulk Pack of 10 Kwik-Fire™ Premium Igniter replacement - 200 watts Incoloy®Fits the following:Avalon® - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Newport Bay PI, Newport PS.Lopi® - Heritage Bay PI, Leyden PS, Pioneer Bay PI, Pioneer PS, Yankee Bay.Replaces Travis® 99300148, 99300149
-
IGNITER Dealer Bulk Pack of 10 Kwik-Fire™ Premium Igniter replacement - 400 watts Incoloy® Fits the following: Enviro® - EF5 - Evolution Ser. #=> 10221, Empress FS & FPI, Milan, Mini< Windsor VistaFlame® - Windsor
-
IGNITER Dealer Bulk Pack of 10 Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.75” “Long” Fits the following: ST Croix® - Afton Bay, Ashby P, Ashby MF, Prescott EXL, Prescott ESP. Models made 2004 & after . -
IGNITER Dealer Bulk Pack of 10 Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.25” “Short” Fits the following: ST Croix® - Element P, Hastings, York Insert & All units made 2003 & earlier -
IGNITER Dealer Bulk Pack of 10 Kwik-Fire™ Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® Fits the following: US Stove®- King/Ashley 5500, 5500XL, 5500M, 5510, 5700, -
Dealer bulk pack of 10 Kwik-Fire™ of premium Incoloy® igniters 400 watt without fuses & anti-seize compound.
Fits the stoves listed below.
-
Hi Limit Heat Sensor Open on temp rise @ 325°F Ceramic, 5/8" Surface Mount. -
Hi Limit Heat Sensor Open on temp rise @ 200°F Ceramic, 5/8" Airstream (Hole) Mount. #2.
-
Hi Limit Heat Sensor Open on temp rise @ 175°F. Ceramic, 5/8" Hole-Airstream mounting, Manual Reset. -
300°F phenolic heat sensor. Includes spacers for surface or hole mounting.
Fits the stoves listed in the DESCRIPTION.
-
250°F phenolic heat sensor. Includes spacers for surface or hole mounting.
Fits the stoves listed in the DESCRIPTION.
-
Hi Limit Heat Sensor Open on temp rise @ 200°F. PHENOLIC, Includes spacers for surface or hole-airstream mounting. -
Hi Limit Heat Sensor Open on temp rise @ 170°F.
-
7' Window Gasket (adhesive 1 side) Fits: All Whitfield® stoves -
Glass Cleaner 16 FL OZ. Comes in a spray trigger bottle. This stuff really works well. OEM part # GLCL -
Gasket, "O" Ring. 3 Per Pack.
Fits the stoves listed in the DESCRIPTION.
-
3 per pack for use with the older style drop in burn grate / burn pot.
Fits stoves listed below.
-
Gasket 500° Black Silicone Rubber Convection/Room Air Blower Gasket -
Gasket Hi Temp Convection/Room Air Blower Gasket. Fits the following Pellet Stoves. -
Motor size: 5-7/8 inside diameter. 7" outside diameter. For use between blower housing and exhaust motor.
Fits the stoves listed in the DESCRIPTION.
-
Motor side 4-7/8" ID - 6" OD. *Note: Will fit stove models that have the 5-3/4" "Quick Change" style hub only. For use between blower housing and exhaust motor.
Fits several pellet stoves listed below.
Enviro® - EF2, EF3, EF4, EF5 (Evolution), Empress FS, Empress FPI, Meridian, Milan, Mini, Solus & Windsor.
Kozi® - KSH120, KSH120DX, 100 FS & insert, BayWin FS & insert, Previa.
Vistaflame® - VF 100 & VF Windsor.
Regency® - GF55 & GFI55.
Replaces Lennox® part# 61020015
Replaces Enviro® part# EF-012, ef012
Replaces Breckwell® part# C-G-105, cg105
Replaces US Stove 88148
-
Gasket cement 2.25 fl oz. Includes "clip top" spout for easy application and a recloseable cap.
-
Gasket Cement 10.3 FL OZ. tube.
Adheres fiberglass gasketing.
OEM part # 110C
Cases of 12 available.
-
Fuse 10 Pack Fits the stoves listed in the DESCRIPTION.
-
10.3 FL OZ tube
Withstands temperatures up to 2000°F.
OEM part # 122
Cases of 12 available.
-
10.3 FL OZ tube.
Withstands temperatures up to 2000°F.
OEM part # 120.
Cases of 12 available.
-
1-1/4" Thick W/Hole - 4-1/2" x 9" Replaces Quadrafire® part # SRV436-0380. -
Fits Quadrafire® 21-M. Replaces Quadrafire® part # SRV473-0370. -
Firebrick -1-1/4" Thick W/Hole -4-1/2" x 9".
Fits: Quadrafire®.
Models: 41-I & Bodega Bay.
Replaces Quadrafire® brick: SRV-7004-199.
-
1-1/4" Thick W/Hole - 4-1/2" x 9" Replaces Quadrafire® part # SRV-435-0800. -
Firebrick 1-1/4" Thick 4-1/2" x 7-1/2".
Fits: Quadrafire® - Yosemite
Replaces Quadrafire® Stove: BRICK-7004 19.4
-
Firebrick -1-1/4" Thick 1" x 9".
Fits: Earth® Stove.
Replaces brick: FB29.
-
Firebrick -1-1/4" Thick 1" x 5".
Fits: Earth® Stove.
Replaces brick: FB23.
-
1-1/4" Thick 3-1/4" x 9".
Fits: Earth® Stove.
Replaces brick: FB22.
-
Firebrick 1-1/4" Thick 4-3/8" x 4-1/2".
Fits: Earth® Stove.
Replaces brick: FB11.
-
1-1/4" Thick 1-1/2" x 4-1/2". -
1-1/4" Thick notched top 1" x 9". -
1-1/4" Thick 2" x 9".
Fits: Earth® Stove.
Replaces brick: FB7.
-
1-1/4” Thick Notched Top 2-1/4” x 9” -
1-1/4" Thick notched top with hole 4-1/2" x9".
Fits: Earth® Stove.
Replaces brick: FB3.
-
1-1/4" Thick notched top 4-1/2" x9". -
1-1/4" Thick 4-1/2" x 9". Replaces Earth® Stove brick FB1. -
1 Piece Premium Fire-Tek™ Firebrick. -
Replaces Lennox® part # 20950150. -
1 piece Premium Fire-Tek™ Firebrick. -
3 piece Premium Fire-Tek™ Firebrick set. -
Replaces Lennox® part # 17150025. -
1 piece Premium FIRE-TEK™ Firebrick. -
3 piece Premium Whitfield FIRE-TEK™ Firebrick set. Replaces Lennox® Part # 11750015. -
1 piece Premium Fire-Tek™ Firebrick.
Fits the stove listed below.
-
3 piece Premium Fire-Tek™ Firebrick set. Replaces St Croix® part # 80P53983 -
3 piece Premium Fire-Tek™ Firebrick set. Fits: Fits St Croix® - Auburn FS Replaces St Croix® part # 80P53982
-
3 piece Premium Fire-Tek™ Firebrick set.
Fits: Fits St Croix® - Hastings
Replaces St Croix® part # 80P53981
-
3 piece Premium Fire-Tek™ Firebrick set.
Fits: Fits St Croix® - Afton Bay FS.
Replaces St Croix® part # 80P53980
-
3 piece Premium FIRE-TEK™ Firebrick set Fits Breckwell Pellet Stoves -
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium FIRE-TEK™ Firebrick. Fits the following: Pel Pro™ - FPP2BD, FPPST4BD, FPPBW2GD, IPPBW2GD, HHPP2BD, HHPP32BD, HHPP2BD, HHPP32BD Glow Boy™ - CCGB1, CCGB2, HGBH1 Home Heater, HGBH3 Home Heater 300, HGB1 Shop Heater, HGB3 Shop Heater 300, FBG Step Top, FGB Bay View, IGB Bay View, Classic Insert -
3 piece Premium FIRE-TEK™ Firebrick set. -
3 piece Premium Fire-Tek™ Firebrick set. Replaces Lennox® part # 20950150. -
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
3 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stove listed below.
-
3 piece Premium FIRE-TEK™ Firebrick set -
1 piece Premium Fire-Tek™ Firebrick.
Fits the stove listed below.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
3 piece Premium Fire-Tek™ Firebrick set.
Please confirm center brick height 12-3/4".
Fits the stoves listed in the DESCRIPTION.
-
3 piece Premium Fire-Tek™ Firebrick set.
Please confirm center brick height 13-7/8".
Fits the stoves listed in the DESCRIPTION.
-
3 piece Premium Fire-Tek™ Firebrick set.
Fits the stove listed below.
-
3 piece Premium FIRE-TEK™ Firebrick set -
Exhaust Blower Motor Premium Fasco Ball Bearing "Quick Change" Style with 500° Silicone Gasket *Note: Will fit stove models that have the 7" "Quick Change" style hub only -
"Quick Change" Style with gasket (PP5200) included. *Note: Will fit stove models that have the 6" "Quick Change" style hub only.
Fits the following:*Avalon® - 900 PI & PS, Newport PS, Newport Bay PILopi® - Fox Fire 400 PS & PI, fox Fire PS, Elan, Heritage Bay PS & PI, Pioneer Bay PS & PI. -
"Quick Change" Style with gasket. *Note: Typically does not require removal of exhaust blower housing.
Fits the stoves listed in the DESCRIPTION.
