Tags
-
longdesc -
Fits all Whitfield® & Enviro®.
Replaces Lennox® part: 61050003 -
Gasket cement 2.25 fl oz. Includes "clip top" spout for easy application and a recloseable cap. -
Replaces upper bearing. Fits the following stoves: Whitfield® & Traditions® - T-300P. -
Firebrick -1-1/4" Thick 1" x 9".
Fits: Earth® Stove.
Replaces brick: FB29.
-
Convection/room air blower gasket.
Fits the stoves listed in the DESCRIPTION.
-
1-1/4" Thick 4-1/2" x 9". Replaces Earth® Stove brick FB1. -
10.3 FL OZ tube.
Withstands temperatures up to 2000°F.
OEM part # 120.
Cases of 12 available.
-
Firebrick 1-1/4" Thick 4-3/8" x 4-1/2".
Fits: Earth® Stove.
Replaces brick: FB11.
-
1-1/4" Thick 3-1/4" x 9".
Fits: Earth® Stove.
Replaces brick: FB22.
-
Firebrick -1-1/4" Thick 1" x 5".
Fits: Earth® Stove.
Replaces brick: FB23.
-
1-1/4" Thick 2" x 9".
Fits: Earth® Stove.
Replaces brick: FB7.
-
Firebrick 1-1/4" Thick 4-1/2" x 7-1/2".
Fits: Quadrafire® - Yosemite
Replaces Quadrafire® Stove: BRICK-7004 19.4
-
10.3 FL OZ tube
Withstands temperatures up to 2000°F.
OEM part # 122
Cases of 12 available.
-
1/4" - 20 NC to 5/16" - 18 NC Adaptor for adapting to or from Worcester/Rutland pellet brushes and rods. -
Motor side 4-7/8" ID - 6" OD. *Note: Will fit stove models that have the 5-3/4" "Quick Change" style hub only. For use between blower housing and exhaust motor.
Fits several pellet stoves listed below.
Enviro® - EF2, EF3, EF4, EF5 (Evolution), Empress FS, Empress FPI, Meridian, Milan, Mini, Solus & Windsor.
Kozi® - KSH120, KSH120DX, 100 FS & insert, BayWin FS & insert, Previa.
Vistaflame® - VF 100 & VF Windsor.
Regency® - GF55 & GFI55.
Replaces Lennox® part# 61020015
Replaces Enviro® part# EF-012, ef012
Replaces Breckwell® part# C-G-105, cg105
Replaces US Stove 88148
-
Gasket Hi Temp Convection/Room Air Blower Gasket. Fits the following Pellet Stoves. -
GASKET Hi Temp Convection/Room Air Blower Gasket Fits the following Pellet Stoves: US Stove® - 6035, 5500XLT, 5500M, 5510, 5700, 6037, 6039, 6039HF, 6039I, 6041, 6041HF, and 6041I -
1-1/4" Thick 1-1/2" x 4-1/2". -
1-1/4" Thick notched top 4-1/2" x9". -
Firebrick -1-1/4" Thick W/Hole -4-1/2" x 9".
Fits: Quadrafire®.
Models: 41-I & Bodega Bay.
Replaces Quadrafire® brick: SRV-7004-199.
-
Gasket Cement 10.3 FL OZ. tube.
Adheres fiberglass gasketing.
OEM part # 110C
Cases of 12 available.
-
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
Convection & Exhaust Blower modular amp style, 2 wire plug in electrical connector 25" long. Fits stoves listed below. -
Gasket 500° Black Silicone Rubber Convection/Room Air Blower Gasket -
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
1-1/4" Thick W/Hole - 4-1/2" x 9" Replaces Quadrafire® part # SRV436-0380. -
1-1/4" Thick W/Hole - 4-1/2" x 9" Replaces Quadrafire® part # SRV-435-0800. -
Fits Quadrafire® 21-M. Replaces Quadrafire® part # SRV473-0370. -
1-1/4" Thick notched top 1" x 9". -
1-1/4” Thick Notched Top 2-1/4” x 9” -
Motor size: 5-7/8 inside diameter. 7" outside diameter. For use between blower housing and exhaust motor.
Fits the stoves listed in the DESCRIPTION.
-
Exhaust Motor Gasket. 500° Silicone Rubber Mounting Gasket. "Quick Change" style hub only. -
For use between blower housing and exhaust duct. Housing size: 4-7/8" inside diameter. Fits the stoves listed in the DESCRIPTION. -
1-1/4" Thick notched top with hole 4-1/2" x9".
Fits: Earth® Stove.
Replaces brick: FB3.
-
500° Silicone Rubber Mounting gasket. Motor Side 5-7/8” ID - 7” OD For use between blower housing and exhaust motor. -
Glass Cleaner 16 FL OZ. Comes in a spray trigger bottle. This stuff really works well. OEM part # GLCL -
250°F phenolic heat sensor. Includes spacers for surface or hole mounting.
Fits the stoves listed in the DESCRIPTION.
-
Hi Limit Heat Sensor, L-200°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Quadrafire Pellet: 800 (#3), 1000 (#3), 1100i (#3), MT Vernon (#2).Pel Pro Pellet: PPC90, TSC90.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Heatilator Eco-Choice pellet: CAB50, PS35, PS50.Quadrifire Pellet: Castile, Castile Insert (#2), Classic Bay 1200 &1200i insert, Contour, Edge 60 ZC Fireplace, Mt Vernon, Mt Vernon AE &AE insert, Santa Fe & Santa Fe insert.SBI Stoves:Drolet Pellet: Eco-35, Eco-45.Enerzone Pellet: Bio-35 (#=100-324), Bio-35 insert (#=100-324), Bio-45MF, Eurozone.Flame Pellet: FP-35 (#=100-440), FP-35 Insert (#=>100), FP-45 (#=100-1354)Osburn Pellet: Hybrid 35 Insert (#=100-499), Hybrid 45.PSG Pellet: Cobra/Legend.PSG Wood: Mini-Caddy Furnace - Wood or Combination (#=14464-15413).
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Enviro Pellet: EF2, EF3, EF4, EF5 Evolution, Solus.Vista Flame Pellet: VF100.
-
160°F Phenolic Heat Sensor. Includes spacers for surface or hole mounting.
Replaces Enviro® part # EF-013
Also fits hundreds of different models of wood & pellet stoves & gas fireplaces.
-
300°F phenolic heat sensor. Includes spacers for surface or hole mounting.
Fits the stoves listed in the DESCRIPTION.
-
Low Limit 120°F Phenolic Heat Sensor. Fits hundreds of different models of wood & pellet stoves & gas fireplaces. -
Low Limit 130°F Phenolic Heat Sensor. -
Low limit 140°F Phenolic heat sensor Includes spacers for surface or hole mounting. -
Fits hundreds of different models of wood, pellet stoves & gas fireplaces. -
Lo Limit Heat Sensor
-
3 per pack for use with the older style drop in burn grate / burn pot.
Fits stoves listed below.
-
Gasket, "O" Ring. 3 Per Pack.
Fits the stoves listed in the DESCRIPTION.
-
Hi Limit Heat Sensor, L-120°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Quadrafire Pellet: 800, 1000, 1100i Insert.Quadrafire Gas: GB40 FS, GB40i Insert.
-
Lo Limit Heat Sensor, F-120/125°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GD144, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Lo Limit Heat Sensor, F-110°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor.Fits the Following:Breckwell Pellet: Big E, Classic Cast, P20, P22, P23, P24, P26, P28, P32, P1000, P2000, P2700, P4000, SP6000 =<2013.US Stove Pellet: 5040, Golden Eagle.
-
Lo Limit Heat Sensor, F-140/145°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GDI44, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA 1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Surface Mount.Fits the Following:Austroflamm Pellet: Integra.
-
Lo Limit Heat Sensor Close temp rise @ 125°F Ceramic, Straight Terminals, Surface Mount. Blower/fan sensor. -
Hi Limit Heat Sensor Open on temp rise @ 200°F. PHENOLIC, Includes spacers for surface or hole-airstream mounting. -
Hi Limit Heat Sensor Open on temp rise @ 170°F.
-
Hi Limit Heat Sensor Open on temp rise @ 175°F. Ceramic, 5/8" Hole-Airstream mounting, Manual Reset. -
Hi Limit Heat Sensor Open on temp rise @ 200°F Ceramic, 5/8" Airstream (Hole) Mount. #2.
-
Lo Limit Heat Sensor Close on temp rise @ 110°F Ceramic, 5/8" Airstream (Hole) Mount. -
Lo Limit Heat Sensor Close on temp rise @ 160°F Ceramic, 5/8" Airstream (Hole) Mount. Blower/Fan sensor. -
Hi Limit Heat Sensor Open on temp rise @ 325°F Ceramic, 5/8" Surface Mount. -
Adaptor 3" Exhaust Transition Blower Adaptor -
Fuse 10 Pack Fits the stoves listed in the DESCRIPTION.
-
3" Pellet vent brush. Soft Stainless Steel 1/4" - 20 NC threaded end for use with flexible Nylon extension rods (PP5524). -
Silicone 500°F black. 10.3 FL OZ tube.
Ideal for sealing pellet stove exhaust.
OEM part # 601B
Cases of 12 available.
-
500°F clear, 10.3 FL OZ tube.
Ideal for sealing pellet stove exhaust.
OEM part # 601C
Cases of 12 available.
-
Soft stainless steel. 1/4" - 20 NC threaded end for use with flexible nylon extension rods.
-
Blower 4.75" - 12 Petal
Fits the stoves listed in the DESCRIPTION.
-
Synthetic Bearing Oil "Anderol 465" 2 oz.
-
Blower 4.44" - 9 Petal.
Fits the stoves listed in the DESCRIPTION.
-
IMPELLER, EXHAUST BLOWER 5” - 12 Petal Fits the following pellet stoves: Harman® - Accentra FS, Invincible T, Pellet Pro II, PC-45 & PF100 -
1 pair of Firebrick Retention Clips.
Fits the stoves listed in the DESCRIPTION.
-
1 pair of Firebrick Retention Clips.
Fits the stove listed below.
-
Blower impeller 5.35" 12 petal.
Fits the stoves listed in the DESCRIPTION.
-
For exhaust blower 4.5" - 11 Petal.
Fits the stoves listed in the DESCRIPTION.
-
Blower 5" - 12 Petal x 2 (24). Fits Harman®ACC521 Insert, Advance, HF60, Invincible Insert, Invincible RS, P38, P43, P61, P61A, P68, XXV, PB105, PF100, DVC500, 44 MAG. -
1/4”-20 NC Threaded Ends for use with Pellet Vent -
Lower, Nylatron MB replacement bearing for all Nylatron style lower auger end plates.
(This bearing comes in our PP4010 auger end plate).
Fits the stoves listed in the DESCRIPTION.
-
1050°F, black, 10.3 FL OZ tube.
Flexible sealant (similar to Mil-Pac™).
For sealing vent pipe joints.
OEM part # 615
Cases of 12 available.
-
Exhaust Heat Sensor, Low Limit 120°F, Ceramic. Fits the following: Avalon - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Avalon AGP, Newport Bay PI, Newport PS. Lopi - Heritage Bay PI, Heritage Bay PS, Leyden PS, Lopi AGP, Pioneer Bay PI, Pioneer PS, Yankee Bay PI, Yankee PS.
-
7 Hole Fire Burn Pot Fits all Traeger Models EXCEPT 070 -
Harman Igniter Holder-Cradle
-
IMPELLER, EXHAUST BLOWER 5.6” - 12 Petal Fits the following pellet stoves: Enviro® - Maxx, Maxx-A, Maxx-B, Maxx-1, Omega, Omega-A Vista Flame®- VF-170, VF-170-B. -
140°F, Ceramic, Surface or Airstream (Hole) Mount -
3/8" m x 5-1/2' Gasket & Cement.
Fits: Whitfield® - Renaissance & Prodigy.
-
KB Electronics 2.5 Amps -Heavier duty than most Control Knob & mounting nut On-Off - Hi to Lo operation Built in RFI filter Adjustable potentiometer trim pot
-
Impeller 4.5" - 11 Petal. Fits Kozi® - KSH120, KSH120DX, 100 FS & Insert, BayWin FS & Insert, Previa.
-
Igniter, "Plug and Play" Compatible with all Traeger Grill models.
-
Steel blower wheel - Not plastic
Centrifugal, 3.75" convection replacement for plastic models.
Fits convection blowers listed below.
-
7' Window Gasket (adhesive 1 side) Fits: All Whitfield® stoves -
Induction Fan, "Plug & Play", Compatible with all Traeger grill models.
-
1/2" m x 7' Gasket & Cement.
Fits the stoves listed in the DESCRIPTION.
-
3/4" m x 5-1/2' Gasket & Cement. Fits the stoves listed in the DESCRIPTION. -
Hi Limit Heat Sensor, L-200°F Ceramic, Large Surface Mount, Manual Reset.Fits the Following: Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Omega, P3, P4, Solus, Windsor.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
Lo Limit Heat Sensor, F-120°F Ceramic, Airstream (Hole) Mount, Blower/Fan sensor.Fits the Following:Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Mini, Omega, P3, P4, Solus, Winsdor.Enviro Gas: 828, Accent 20, Accent 25, Ascot, Bedford, Cara, DV36, DV42, DV50, E20, E30, E33, EG20, EG22, EG25, EG28, EG30, EG33, EG40, EG93, EG95, Focus DX, Haven Q1, Q2, Q3, S30, Sienna, Sonnet, Retreat, Westport.Enviro Wood: 1000, 1200, 1600, 1700, 2100.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
Auger Drive Motor, 2 RPM CW, "Plug & Play", Compatible with All Traeger grill models.
-
Convection Axial Fan, Sleeve Bearing Motor with wire spade terminals. Nylon Blade. .40 Amp.Fits Several Wood Stoves incuding:Blaze King: KE, PE, PI, RGT, SC20, CK20, SC30, CL30, AF30, and BRII Insert.
-
3/4" m x 7' Gasket & Cement.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
Auger endplate includes nylatron style bearing universal replacement for outdated endplates with brass bearings. Comes with PP5206 gasket.
Fits the stoves listed in the DESCRIPTION.
-
Short description
-
Replaces Lennox® part # 17150025. -
Baffle, Heat Deflector.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
UNIGRATE™ Adaptor plate use this adaptor plate to convert the 14 bar, 6-7/8” wide UltraGrate™, to the 5-1/4” wide UniGrate™.
Fits the stoves listed in the DESCRIPTION. For use with PP2007 Uni-Grate
-
Kwik-Fire™ 300 watt premium Incoloy® Igniter replacement.
Fists the stoves listed below.
-
Kwik-Fire™ Premium Igniter replacement for 300 watt standard Incoloy® Igniter.
Fits the stoves listed in the DESCRIPTION.
-
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® Fits the following: US Stove®- King/Ashley 5500, 5500XL, 5500M, 5510, 5700, -
Kwik-Fire™ 200 watt premium Incoloy® Igniter replacement. Fits Avalon® - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Newport Bay PI, Newport PS. Lopi® - Heritage Bay PI, Leyden PS, Pioneer PS, Yankee Bay.
Replaces: Travis® 99300148, 99300149
-
This burn grate is 6" long, stainless steal and identical to OEM part. Not available from Lennox®.
****NOTE**** Measure your burn grate before ordering.
Fits the stoves listed in the DESCRIPTION.
-
Burn grate 6-7/16 wide, stainless steel & identical to OEM part.
****NOTE**** Measure your burn grate before ordering.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stove listed below.
-
1 piece Premium Fire-Tek™ Firebrick.
Fits the stove listed below.
-
1 piece Premium Fire-Tek™ Firebrick. -
Kwik-Fire™ Igniter replacement 300 watt Premium Igniter. Fits Glow Boy® - & Pel Pro® Replaces Glow Boy® - & Pel Pro® part # KS-5030-1061 ACIGNAS -
1 piece Premium Fire-Tek™ Firebrick.
Fits the stove listed below.
-
1 piece Premium FIRE-TEK™ Firebrick. Fits the following: Pel Pro™ - FPP2BD, FPPST4BD, FPPBW2GD, IPPBW2GD, HHPP2BD, HHPP32BD, HHPP2BD, HHPP32BD Glow Boy™ - CCGB1, CCGB2, HGBH1 Home Heater, HGBH3 Home Heater 300, HGB1 Shop Heater, HGB3 Shop Heater 300, FBG Step Top, FGB Bay View, IGB Bay View, Classic Insert -
1 Piece Premium Fire-Tek™ Firebrick. -
1" xs x 7' Gasket & Cement.
Fits: Whitfield® - Profile 30 with 3 piece glass.
-
Baffle, Heat Deflector.
Fits the stoves listed in the DESCRIPTION.
-
This burn grate is 3-9/16" wide, Stainless Steel. Identical to OEM part.
****NOTE**** Measure your burn grate before ordering.
Fits: Breckwell®.
-
Igniter, Kwik-Fire Premium Igniter replacement - 400 watts. Fits the following: Enviro - EF5 - Evolution Ser. # =>10221, Empress FS & FPI, Milan, Mini, Windsor. VistaFlame: - Windsor
-
Replacement Includes Mounting Bracket. -
1 piece Premium FIRE-TEK™ Firebrick. -
3 piece Premium Fire-Tek™ Firebrick.
Fits the stoves listed in the DESCRIPTION.
-
"Generic" Exhaust - Convection Blower Motor, CW Rotation, Ball Bearings Shaft: 5/16" x 1-1/2" (.312"x1.5") Note: Comes with 3 Female Insulated wire terminals. -
Kwik-Fire™ Igniter replacement 310 watt Incology® Premium Igniter.
Fits the stoves listed in the DESCRIPTION.
-
Kwik-Fire™ Premium Igniter replacement kit with 400 watt standard Incoloy® Igniter. Includes fuse & anti-seize compound. -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.25” “Short” Fits the following: ST Croix® - Element P, Hastings, York Insert & All units made 2003 & earlier -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.75” “Long” Fits the following: ST Croix® - Afton Bay, Ashby P, Ashby MF, Prescott EXL, Prescott ESP . Models made 2004 & after . -
Kwik-Fire™ 400 watt premium Incoloy® Igniter replacement. Fits Enviro® EF5 - Evolution Ser. # = > 10221, Empress FS & FPI, Milan, Mini, Windsor, VistaFlame® - Windsor
Replaces Enviro® OEM Part # 50-619, 20-022
VistaFlame® OEM Part # 50-619, 20-022
-
Auger Motor, 1RPM CCW (1.45NL), Standard Auger Motor.
-
Auger Motor, 2 RPM CW, Standard Auger motor.
-
Auger Motor, 4 RPM CW, Standard Auger Motor.
-
Comes with wire terminals. Plugs into existing 30" long wire cable.
Fits the stoves listed below and several others.
-
3 piece Premium Fire-Tek™ Firebrick set.
Fits: Fits St Croix® - Afton Bay FS.
Replaces St Croix® part # 80P53980
-
1 Piece Baffle Kit. Includes precut blanket -
Maxi-Torq™ 1 RPM CW Premium Heavy Duty Auger Motor. Comes with hole in the shaft and correct length & color wire leads. Fits the stoves listed in the DESCRIPTION. NOTE: Direction of rotation is determined by pointing the output shaft directly at your face. See thumbnail photo example for details as seen on the left. -
PREMIUM FASCO BALL BEARING With crimpable wire spade terminals. .90 AMP -
Includes pre-cut blanket.
Fits the stoves listed in the DESCRIPTION.
-
Baffle Board & Ceramic Blanket Kit 1 Piece. Includes precut blanket -
Baffle Board Kit 2 Piece. Includes precut blanket Fits the following: Quadrafire® - 2100 Millenium ACC (21M-ACC)
-
3 piece Premium Fire-Tek™ Firebrick set. Replaces St Croix® part # 80P53983 -
3 piece Premium Fire-Tek™ Firebrick set. -
3 piece Premium Fire-Tek™ Firebrick set.
Fits: Fits St Croix® - Hastings
Replaces St Croix® part # 80P53981
-
3 piece Premium Fire-Tek™ Firebrick set. Fits: Fits St Croix® - Auburn FS Replaces St Croix® part # 80P53982
