Tags
No tags to display. Try to select another taxonomy.
-
Induction Fan, "Plug & Play", Compatible with all Traeger grill models. -
"Generic" Exhaust - Convection Blower Motor, CW Rotation, Ball Bearings Shaft: 5/16" x 1-1/2" (.312"x1.5") Note: Comes with 3 Female Insulated wire terminals. -
Exhaust Blower Motor, Fasco -1.0 AMP, "Quick Change" style with Hi Temp Fiber Gasket, CW Rotation. **Note: Will fit most pellet stoves models that have the 6 "Quick Change" style hub. -
Auger Drive Motor, 2 RPM CW, "Plug & Play", Compatible with All Traeger grill models.
-
Auger Motor, 1RPM CCW (1.45NL), Standard Auger Motor.
-
Auger Motor, 4 RPM CW, Standard Auger Motor.
-
Auger Motor, 2 RPM CW, Standard Auger motor.
-
Auger Motor, 1 RPM CW (1.1 NL), Standard Auger Motor. -
Igniter, "Plug and Play" Compatible with all Traeger Grill models.
-
Igniter, Kwik-Fire Premium Igniter replacement - 400 watts. Fits the following: Enviro - EF5 - Evolution Ser. # =>10221, Empress FS & FPI, Milan, Mini, Windsor. VistaFlame: - Windsor
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, 15 fins, 310 Watts. Fits the following: Harman - P-38 , P-43, P-61, P-61A, P-68, PF-100, PB-105, HF-60, Advance, Accentra FS & Insert, Invincible RS.
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, without fuse & Anti-Seize. Fits the Following: Whitfield - Profile 20&30; Advantage. -
KB Electronics 2.5 Amps -Heavier duty than most Control Knob & mounting nut On-Off - Hi to Lo operation Built in RFI filter Adjustable potentiometer trim pot
-
140°F, Ceramic, Surface or Airstream (Hole) Mount -
Exhaust Heat Sensor, Low Limit 120°F, Ceramic. Fits the following: Avalon - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Avalon AGP, Newport Bay PI, Newport PS. Lopi - Heritage Bay PI, Heritage Bay PS, Leyden PS, Lopi AGP, Pioneer Bay PI, Pioneer PS, Yankee Bay PI, Yankee PS.
-
7 Hole Fire Burn Pot Fits all Traeger Models EXCEPT 070 -
Convection & Exhaust Blower modular amp style, 2 wire plug in electrical connector 25" long. Fits stoves listed below. -
6-7/8" wide. Stainless Steel, Replacement for 13 Bar Ultragrate. -
Stainless steel replacement for 10 bar Ultragrate®. The body of this grate is one piece. The bottom has welded round rods. May require part PP2199 UniGrate Adaptor Plate for fitting. ****NOTE**** Measure your burn grate before ordering. -
UNIGRATE™ Adaptor plate use this adaptor plate to convert the 14 bar, 6-7/8” wide UltraGrate™, to the 5-1/4” wide UniGrate™.
Fits the stoves listed in the DESCRIPTION. For use with PP2007 Uni-Grate
-
longdesc -
Synthetic Bearing Oil "Anderol 465" 2 oz.
-
500°F clear, 10.3 FL OZ tube.
Ideal for sealing pellet stove exhaust.
OEM part # 601C
Cases of 12 available.
-
Silicone 500°F black. 10.3 FL OZ tube.
Ideal for sealing pellet stove exhaust.
OEM part # 601B
Cases of 12 available.
-
1050°F, black, 10.3 FL OZ tube.
Flexible sealant (similar to Mil-Pac™).
For sealing vent pipe joints.
OEM part # 615
Cases of 12 available.
-
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.75” “Long” Fits the following: ST Croix® - Afton Bay, Ashby P, Ashby MF, Prescott EXL, Prescott ESP . Models made 2004 & after . -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® 4.25” “Short” Fits the following: ST Croix® - Element P, Hastings, York Insert & All units made 2003 & earlier -
IGNITER Kwik-Fire™ Premium Igniter replacement - 250 watts Incoloy® Fits the following: US Stove®- King/Ashley 5500, 5500XL, 5500M, 5510, 5700, -
Kwik-Fire™ Premium Igniter replacement kit with 400 watt standard Incoloy® Igniter. Includes fuse & anti-seize compound. -
PREMIUM FASCO BALL BEARING With crimpable wire spade terminals. .90 AMP -
Convection Blower, Fasco 2 Speed, Ball Bearing Motor with 3 wires, mounting grommets 7 crimpable wire spade terminals. 1.05 AMP.Fits Several Wood Stoves including:Regency Wood - Alterra:CS1200, CS2400, CI1250; CI2601, F1100S, F2100M, F2400M, F3100L, F3500B, F5100B, H2000M, H2100M, I1100S, I1200S, I2100M, I2400M, I3100L, R12, S2100M, S3100L, Z2510, Z2500RO.Regency Gas - C33, C33-1, C33-2, C33-3, C34, C34-1, C34-2, C-34-3, C-34-10, GR47, GR48, GR54, GR55, GR57, GR58, GR77, GR78, HZ40E, HZ40E-1, HZ40E-2, HZ40E-10, HZ54E, HZ54E-1, HZ54EPV, P42, P42-1, P42-2, P42-3, P42-4, U23, U24, U41, U41-1, U41-2, U41-3, U41-FS, U41-IN, U42, U43, U44, U-43-1, U43-2, U43-3, U41-DV, U45, U45-1, U45-2, U45-3, U46, U900E, U1500E, Z30DVT.
-
Convection Axial Fan, Sleeve Bearing Motor with wire spade terminals. Nylon Blade. .40 Amp.Fits Several Wood Stoves incuding:Blaze King: KE, PE, PI, RGT, SC20, CK20, SC30, CL30, AF30, and BRII Insert.
-
Convection Blower, Ball Bearing Motor, mounting grommets & crimpable wire spade terminals. .84 AMP. Fits several wood stoves including:* Blaze King: 2203, 7009, 8003, 9703, 9802, PI. (Attn: Confirm fit prior to ordering) Pacific Energy: Alderlea T4 &T4 Classic, Alderlea T5&T5 Classic, Alderlea T6, Vista, Vista Classic, Super 27, Spectrum, Spectrum Classic, Design-D, Neo 1.6, Neostone Series A, Neo 2.5, Neostone Series A, Series C, Neo 1.6, Newcastle Series A, Neo 2.5, Newcastle series A.
-
Convection Blower, Fasco "Plug n Play", 2 speeds, Ball Bearing Motor, mounting grommets & crimpable wire spade terminals, .84 AMP.Fits several wood stoves including:*Blaze King: 2203, 7009, 8003, 9703, 9802, PI. (Attn: Confirm fit prior to ordering)Pacific Energy: Alderlea T4 &T4 Classic, Alderlea T5&T5 Classic, Alderlea T6, Vista, Vista Classic, Super 27, Spectrum, Spectrum Classic, Design-D, Neo 1.6, Neostone Series A, Neo 2.5, Neostone Series A, Series C, Neo 1.6, Newcastle Series A, Neo 2.5, Newcastle series A.
-
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
GASKET, 500° Silicone Rubber Convection/Room Air Blower Gasket. -
500° Silicone Rubber Mounting gasket. Motor Side 5-7/8” ID - 7” OD For use between blower housing and exhaust motor. -
Exhaust Motor Gasket. 500° Silicone Rubber Mounting Gasket. "Quick Change" style hub only. -
Hi Limit Heat Sensor, L-250°F Ceramic, Surface Mount.Fits the Following:Austroflamm Pellet: Integra.
-
Lo Limit Heat Sensor, F-120°F Ceramic, Airstream (Hole) Mount, Blower/Fan sensor.Fits the Following:Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Mini, Omega, P3, P4, Solus, Winsdor.Enviro Gas: 828, Accent 20, Accent 25, Ascot, Bedford, Cara, DV36, DV42, DV50, E20, E30, E33, EG20, EG22, EG25, EG28, EG30, EG33, EG40, EG93, EG95, Focus DX, Haven Q1, Q2, Q3, S30, Sienna, Sonnet, Retreat, Westport.Enviro Wood: 1000, 1200, 1600, 1700, 2100.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
Lo Limit Heat Sensor, F-110°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor.Fits the Following:Breckwell Pellet: Big E, Classic Cast, P20, P22, P23, P24, P26, P28, P32, P1000, P2000, P2700, P4000, SP6000 =<2013.US Stove Pellet: 5040, Golden Eagle.
-
Lo Limit Heat Sensor, F-140/145°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GDI44, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA 1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Lo Limit Heat Sensor, F-120/125°F Ceramic, Airstream (Hole) Mount, Blower/Fan Sensor. Fits the Following: Napolean Gas: GD19, GD70, GD130, GD130G,GD144, GDIZC, GDS20, GDS25, GDS26, GDS28, GDS50, GDS60, GI3600, GVF40, GVFS60-1, GDI30 Starfire Series. Napolean Wood: 1100, 1400, 1900, EPA1000, EPA1150, EPA1500, EPA2000, EPI1401, EPI1600, EP122, NC12, NC16, NFI-C (Classic), NFI-D (Deluxe), NM2020, NZ25, NZ26, NZ26WI, NZ2000, TI-2201, WM1020. Quadrafire Gas: DV-425, DV-44. Quadrafire Pellet: 800, 1100i, 1200i. Quadrafire Wood: 3100 ACC Millennium, 4300 ACC Millennium, 21M-ACC, 27i ACC, 3100 ACC, 31i-ACC, 43ST-ACC, 57 ACC.
-
Hi Limit Heat Sensor, L-120°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Quadrafire Pellet: 800, 1000, 1100i Insert.Quadrafire Gas: GB40 FS, GB40i Insert.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Igniter Sensor.Fits the Following:Enviro Pellet: EF2, EF3, EF4, EF5 Evolution, Solus.Vista Flame Pellet: VF100.
-
Hi Limit Heat Sensor, L-250°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Heatilator Eco-Choice pellet: CAB50, PS35, PS50.Quadrifire Pellet: Castile, Castile Insert (#2), Classic Bay 1200 &1200i insert, Contour, Edge 60 ZC Fireplace, Mt Vernon, Mt Vernon AE &AE insert, Santa Fe & Santa Fe insert.SBI Stoves:Drolet Pellet: Eco-35, Eco-45.Enerzone Pellet: Bio-35 (#=100-324), Bio-35 insert (#=100-324), Bio-45MF, Eurozone.Flame Pellet: FP-35 (#=100-440), FP-35 Insert (#=>100), FP-45 (#=100-1354)Osburn Pellet: Hybrid 35 Insert (#=100-499), Hybrid 45.PSG Pellet: Cobra/Legend.PSG Wood: Mini-Caddy Furnace - Wood or Combination (#=14464-15413).
-
Hi Limit Heat Sensor, L-200°F Ceramic, Airstream (Hole) Mount, Manual Reset.Fits the Following:Quadrafire Pellet: 800 (#3), 1000 (#3), 1100i (#3), MT Vernon (#2).Pel Pro Pellet: PPC90, TSC90.
-
Hi Limit Heat Sensor, L-200°F Ceramic, Large Surface Mount, Manual Reset.Fits the Following: Enviro Pellet: EF1, EF2, EF3, EF4, EF5 Evolution, Empress FPI, Empress FS, M55, Maxx, Meridian, Milan, Omega, P3, P4, Solus, Windsor.Hudson River Pellet: Chatham, Davenport, Kinderhook.Vista Flame Pellet: VF100, VF Windsor.Regency Pellet: GF55, GFI55.
-
Replacement Includes Mounting Bracket. -
1/4" - 20 NC to 5/16" - 18 NC Adaptor for adapting to or from Worcester/Rutland pellet brushes and rods.
