Tags
-
Induction Fan, "Plug & Play", Compatible with all Traeger grill models. -
"Generic" Exhaust - Convection Blower Motor, CW Rotation, Ball Bearings Shaft: 5/16" x 1-1/2" (.312"x1.5") Note: Comes with 3 Female Insulated wire terminals. -
Exhaust Blower Motor, Fasco -1.0 AMP, "Quick Change" style with Hi Temp Fiber Gasket, CW Rotation. **Note: Will fit most pellet stoves models that have the 6 "Quick Change" style hub. -
Auger Drive Motor, 2 RPM CW, "Plug & Play", Compatible with All Traeger grill models.
-
Auger Motor, 1RPM CCW (1.45NL), Standard Auger Motor.
-
Auger Motor, 4 RPM CW, Standard Auger Motor.
-
Auger Motor, 2 RPM CW, Standard Auger motor.
-
Auger Motor, 1 RPM CW (1.1 NL), Standard Auger Motor. -
Igniter, "Plug and Play" Compatible with all Traeger Grill models.
-
Igniter, Kwik-Fire Premium Igniter replacement - 400 watts. Fits the following: Enviro - EF5 - Evolution Ser. # =>10221, Empress FS & FPI, Milan, Mini, Windsor. VistaFlame: - Windsor
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, 15 fins, 310 Watts. Fits the following: Harman - P-38 , P-43, P-61, P-61A, P-68, PF-100, PB-105, HF-60, Advance, Accentra FS & Insert, Invincible RS.
-
Igniter 10 Pack, Dealer Bulk Pack of 10 Kwik-Fire Standard Igniters, without fuse & Anti-Seize. Fits the Following: Whitfield - Profile 20&30; Advantage. -
KB Electronics 2.5 Amps -Heavier duty than most Control Knob & mounting nut On-Off - Hi to Lo operation Built in RFI filter Adjustable potentiometer trim pot
-
140°F, Ceramic, Surface or Airstream (Hole) Mount -
Exhaust Heat Sensor, Low Limit 120°F, Ceramic. Fits the following: Avalon - Arbor, Astoria Bay PI, Astoria PS, Avanti PI, Avanti PS, Avalon AGP, Newport Bay PI, Newport PS. Lopi - Heritage Bay PI, Heritage Bay PS, Leyden PS, Lopi AGP, Pioneer Bay PI, Pioneer PS, Yankee Bay PI, Yankee PS.
-
7 Hole Fire Burn Pot Fits all Traeger Models EXCEPT 070 -
Convection & Exhaust Blower modular amp style, 2 wire plug in electrical connector 25" long. Fits stoves listed below. -
longdesc -
Adaptor 3" Exhaust Transition Blower Adaptor -
IMPELLER, EXHAUST BLOWER 5.6” - 12 Petal Fits the following pellet stoves: Enviro® - Maxx, Maxx-A, Maxx-B, Maxx-1, Omega, Omega-A Vista Flame®- VF-170, VF-170-B. -
Blower 5" - 12 Petal x 2 (24). Fits Harman®ACC521 Insert, Advance, HF60, Invincible Insert, Invincible RS, P38, P43, P61, P61A, P68, XXV, PB105, PF100, DVC500, 44 MAG. -
IMPELLER, EXHAUST BLOWER 5” - 12 Petal Fits the following pellet stoves: Harman® - Accentra FS, Invincible T, Pellet Pro II, PC-45 & PF100 -
Impeller 4.5" - 11 Petal. Fits Kozi® - KSH120, KSH120DX, 100 FS & Insert, BayWin FS & Insert, Previa.
-
For exhaust blower 4.5" - 11 Petal.
Fits the stoves listed in the DESCRIPTION.
-
Steel blower wheel - Not plastic
Centrifugal, 3.75" convection replacement for plastic models.
Fits convection blowers listed below.
-
Blower 4.44" - 9 Petal.
Fits the stoves listed in the DESCRIPTION.
-
Blower impeller 5.35" 12 petal.
Fits the stoves listed in the DESCRIPTION.
-
Blower 4.75" - 12 Petal
Fits the stoves listed in the DESCRIPTION.
-
"Plug & Play" fits properly without field modifications. Includes correct wire leads, gasket & heat sensor holes.
Fits several pellet stoves listed below and several others.
-
"Plug & Play" fits properly without field modifications. Includes correct wire leads, gasket & heat sensor holes.
Fits the stoves listed in the DESCRIPTION.
-
"Plug & Play" fits properly without field modifications. Includes correct wire leads, gasket & heat sensor holes.
Fits the stoves listed below and several others.
-
Exhaust Blower Motor Premium Fasco Ball Bearing "Quick Change" Style with 500° Silicone Gasket *Note: Will fit stove models that have the 7" "Quick Change" style hub only -
"Quick Change" Style with gasket (PP5200) included. *Note: Will fit stove models that have the 6" "Quick Change" style hub only.
Fits the following:*Avalon® - 900 PI & PS, Newport PS, Newport Bay PILopi® - Fox Fire 400 PS & PI, fox Fire PS, Elan, Heritage Bay PS & PI, Pioneer Bay PS & PI. -
"Quick Change" Style with gasket. *Note: Typically does not require removal of exhaust blower housing.
Fits the stoves listed in the DESCRIPTION.
-
"Quick Change" Style with gasket 3000 RPM.
*Note: Typically does not require removal of exhaust blower housing.
Fits the stoves listed in the DESCRIPTION.
-
"Quick Change" Style with gasket 2900 RPM. *Note: Typically does not require removal of exhaust blower housing.
Fits the stoves listed in the DESCRIPTION.
-
Comes with wire terminals. Plugs into existing 30" long wire cable.
Fits the stoves listed below and several others.
-
EXHAUST BLOWER MOTOR “QUICK CHANGE” Style with Gasket *NOTE: Will fit stoves models that have the 7 “ Large Plate Quick Change” style hub only with 5.6” impeller. Fits the following:* Enviro® - Maxx, Maxx-A, Maxx-B, Maxx-1, Omega, Omega-A Vista Flame®- VF-170, VF-170-B Replaces Enviro® 50-1901 -
"Quick Change" Style with gasket ***NOTE***: Will fit stove models that have the 6 "Quick Change" style hub only.
Fits the stoves listed below and several others.
-
Exhaust Blower Motor Premium Fasco Ball Bearing "Quick Change" style with 500° Silicone Gasket. *Note: will fit stove models that have the 6 "Quick Change" style hub only. -
*Note Will fit older 3 wire models as well as newer 2 wire models with digital controls. Newer 2 wire models would be connected by not utilizing the 3rd wire (brown) and leaving it unconnected.
Fits several pellet stoves listed below: -
Includes exhaust impeller, fan cooling blade & gasket.
Fits the stoves listed in the DESCRIPTION.
-
"Quick Change" Style with gasket *NOTE: Will fit stove models that have the 7" "Quick Change" style hub only.
Fits the stoves listed below & several others.
-
“QUICK CHANGE” Style Includes gasket *NOTE: Will fit stove models that have the 6” “Quick Change” style hub only. Fits the stoves listed below and several others. -
Comes with:
- Exhaust Gasket & Impeller
- Convection Gasket & Impeller
- Motor & Motor Gasket
- InstructionsFits the stoves listed in the DESCRIPTION.
-
CONVECTION - BLOWER“Plug & Play” Fits several pellet stoves including:*ST Croix® Models - Afton Bay, Auburn, Element P, Greenfield, Hastings, Prescott EXP, Prescot EXL, Lancaster, Pepin.
-
CONVECTION - BLOWER“Plug & Play” Includes Mounting gasket. Fits several pellet stoves including:*Avalon® - 900 PI & PS, AGP, Arbor, Astoria Bay PI,Lopi® - AGP, Fox Fire 400 PS & PI, Fox Fire PS, Leyden PS, Yankee PS & PI.Replaces: Avalon® & Lopi 250-00588, 90-0491, 98900755, 98900755a
-
PREMIUM FASCO BALL BEARING With crimpable wire spade terminals. .90 AMP -
Convection Blower, Fasco 2 Speed, Ball Bearing Motor with 3 wires, mounting grommets 7 crimpable wire spade terminals. 1.05 AMP.Fits Several Wood Stoves including:Regency Wood - Alterra:CS1200, CS2400, CI1250; CI2601, F1100S, F2100M, F2400M, F3100L, F3500B, F5100B, H2000M, H2100M, I1100S, I1200S, I2100M, I2400M, I3100L, R12, S2100M, S3100L, Z2510, Z2500RO.Regency Gas - C33, C33-1, C33-2, C33-3, C34, C34-1, C34-2, C-34-3, C-34-10, GR47, GR48, GR54, GR55, GR57, GR58, GR77, GR78, HZ40E, HZ40E-1, HZ40E-2, HZ40E-10, HZ54E, HZ54E-1, HZ54EPV, P42, P42-1, P42-2, P42-3, P42-4, U23, U24, U41, U41-1, U41-2, U41-3, U41-FS, U41-IN, U42, U43, U44, U-43-1, U43-2, U43-3, U41-DV, U45, U45-1, U45-2, U45-3, U46, U900E, U1500E, Z30DVT.
-
Convection Axial Fan, Sleeve Bearing Motor with wire spade terminals. Nylon Blade. .40 Amp.Fits Several Wood Stoves incuding:Blaze King: KE, PE, PI, RGT, SC20, CK20, SC30, CL30, AF30, and BRII Insert.
